EasySim
The device is designed to simulate defined variables on the CAN / CAN FD bus for various vehicle platforms. A single-purpose version of EntrySim. We offer the possibility of recycling, send us the device with a request for a new configuration and we will reconfigure it.
The device sends CAN FD messages simultaneously to 2 different CAN buses. Currently available architectures MEB, MQB37W, MQBA0, MQB A / B, the customer can chooses one of the configurations. It is possible to implement for other vehicle platforms as desired.
- Direct access to certain given variables
- Possibility to test special cases / conditions
- Possibility to test certain driving scenarios without a car, only using a test bench
- Currently implemented architectures MEB, MQB37W, MQBA0, MQB A / B.
EasySim simulates the following variables:
- Vehicle speed
- Engine speed
- Ambient light intensity
- Battery charge status
- Low battery indication
- Kl. WITH
- Kl. 15
- Odometer
- Date and time
- VIN code
- Eliminate error messages
- Outside temperature
Technical parameters
- Power supply [V]: 7-24V 50mA, CAN bus
- Operating temperatures: -20°C až 70°C /*
- Storage temperature: -40 °C až 85 °C
- Operating humidity: 10% – 90%
- Dimensions [mm]: 58.8 x 41.2 x 113
- Weight:
* extended operating mode is -40 ° C to 85 ° C. In the extended working range, the device has a standard function, but it is not recommended to manipulate or load the connectors.
Designed and engineered with regard to following standards:
- ISO 11898-2:2016
- SAE J2284-1 – SAE J2284-5
- ISO 7637
- IEC 61000-4-2
Download
Package content
- 1x EasySim
- 2x CAN cable
- user manual
